mzuzuz Posted February 16, 2009 Share Posted February 16, 2009 Probably been covered on this forum many times but I cannot find any threads that talk about making a knife vise? Could someone direct me to thread(s) talking about this. I have seen some really nice ones made from pieces of pipe and would like to make my own. Any pictures of what you are useing would help a ton. Thank you for any advise, pics, help you can provide. Bob Urban Quote Link to comment Share on other sites More sharing options...
jeremy k Posted February 16, 2009 Share Posted February 16, 2009 A google search for "knife vise" turns up some results that are simple and easily made. -JK Quote Link to comment Share on other sites More sharing options...
Don A Posted February 16, 2009 Share Posted February 16, 2009 This is a great link here:Custer Forge & WeldingCuster Forge & Welding Definitly on my "to do" list. Don Quote Link to comment Share on other sites More sharing options...
brucegodlesky Posted February 16, 2009 Share Posted February 16, 2009 Here is mine. Made from a backbar off a Chevy S-10. Cut in half and welded. 2 Nuts welded on outside for snugging up the liners. Liners made from maple and faced with leather. On the outside are 2 pieces of flat stock weldedat 12 oclock and 3 oclock. these give you 2 different aspects in the bench vice. Quote Link to comment Share on other sites More sharing options...
markb Posted February 16, 2009 Share Posted February 16, 2009 (edited) I did a google and found this one which I've seen before. Looks like a good design.http://www.stoneandsteel.net/equip_knifevice.html Heres some morehttp://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=print_topic;f=110;t=000339 Edited February 16, 2009 by markb Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.