January 2, 200917 yr Hello all. My name is Stan Norred and I live in Galveston Co. Texas. I'm 16mi. as a crow flies from the surf. I'm a long term machinist, millwright, welder, builder, designer, yadda, yadda, yadda....... RETIRED. I've worked in the petro-chemical industry for over 30 years, with a few side excursions into manufacturing facilities. I own my own machine and fabrication shop located at my home in the hinterlands of the bustling metropolis of Santa Fe, Texas??? :confused: I found this site doing a search for a ring roller. Considering the cost of purchasing one I've decided to build my own. I've built my own shop and some of my equipment so this should be no problem. Anyway, I'm glad I found Y'all and I'm proud to be accepted as a member. I'm a firm believer in BARTER. I have a good bit to barter with or know where to find it. Right now I'm looking for a 3/4hp gearmotor - reversable, single or three phase, #30 or better chain and sprockets, surplus pillow block bearings 1 1/4" to 2". I have propane tanks - cleaned & purged, but I still insist on making the first cut myself. I have a sawmill & will barter lumber cutting services. I have a 580C backhoe, 231S Massey and 30', 18' & 16' trailers to haul them and a suitable truck up to the task. I will barter backhoe/tractor and/or hauling services. I have octagonal & round traffic light towers to barter but they will pull a premium as they cost $4900 new. I also have a Kohler 45,000 watt 3phase natural gas/propane generator I no longer need (I use a phase converter now). It has a Ford 300 6cyl and runs like new. It has 720 original easy hours. I also offer machining services for those that may need it. Again, I'd rather barter than exchange Federal Reserve notes but I will if I must. Stan The Windstalker Edited January 2, 200917 yr by Windstalker
January 2, 200917 yr Welcome aboard Stan, glad to have ya. You're gonna fit . . . right . . . in. Frosty
January 2, 200917 yr Wow, if only you was a bit closer... I agree with Frosty in that you'll fit right in here at IFI... Look forward to seeing you around... James
January 2, 200917 yr Howdy from East TEXAS!! and welcome to IFI! Ya wanta move north some?!! only about 6-7 hrs north, that's all, just a little closer to Longview maybe?!? Anyway, glad to have you. Chime in when you feel the urge and don't forget to post pictures when you have them! Once again, welcome.
January 2, 200917 yr Stan, You might want to check out HABA - Houston Area Blacksmith's Association. They have a very active chapter in SE Texas and a lot of good folks are members therein.HABA Houston Area Blacksmith's Association
January 3, 200917 yr Author Howdy from East TEXAS!! and welcome to IFI! Ya wanta move north some?!! only about 6-7 hrs north, that's all, just a little closer to Longview maybe?!? Anyway, glad to have you. Chime in when you feel the urge and don't forget to post pictures when you have them! Once again, welcome. I do have 71ac near Mexia but that is still a bit of a drive.....
January 3, 200917 yr Welcome to the forum. Like everyone else said... you'll fit right in! I'm down in Victoria, but am always willin' to drive for a good barter :cool: Also, let me know if your ever in my area I have some good resources down here that are worth a look. Hope to see ya around. Once again welcome to IFI :)
January 4, 200917 yr Stan, let me second the recomendation of HWoolridge and invite you to visit the Houston Area Blacksmiths Association. Many of our members own small farms and ranches and might have use for some of your surplus items.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.