Greg C. Posted December 30, 2008 Share Posted December 30, 2008 (edited) I have a pice of sheet steel, so I designed a knife to make out of it. The drawing is a little crummy; I'm no artist. Anyway, the handle is a coke bottle style, here's the link to make one. cokebottlehandle As you can kinda see in the bottom of the drawing, the knife tang widens out a bit. Don't really trust epoxy that much. And brass will be brass. On the same link, if you hit the back button, it will take you to more tutorials. I am putting a "Half penny" style Quillion guard. Hope you like it, CN Edited December 30, 2008 by Chuck Noris Quote Link to comment Share on other sites More sharing options...
Leland Posted January 3, 2009 Share Posted January 3, 2009 Nice work, and a good set of photo tuts! Thanks for sharing it here! Quote Link to comment Share on other sites More sharing options...
Greg C. Posted January 5, 2009 Author Share Posted January 5, 2009 Thank you for the reply, just finished the blank, its a bit thick, 'bout 1/2 an inch thick. Gonna have to grind at my friends house seeing I don't have a grinder. CN Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted January 5, 2009 Share Posted January 5, 2009 Is that a typo or did you really make it one half of a US standard inch thick? :o Quote Link to comment Share on other sites More sharing options...
Ignis Forge Posted January 5, 2009 Share Posted January 5, 2009 Gonna have to grind at my friends house seeing I don't have a grinder. Yah about that... we kinda ruined it. Did you realy make that or is did someone else? Quote Link to comment Share on other sites More sharing options...
Greg C. Posted January 6, 2009 Author Share Posted January 6, 2009 (edited) Yah about that... we kinda ruined it. Did you realy make that or is did someone else? You what?!?!? All it needs is new wheels, don't scare me like that. Steve, no typo. I'm a 12yo noob, so I don't really know what I'm doing..... I am going to thin it out though, I'm not that much of beginner. CN Edited January 6, 2009 by Chuck Noris Quote Link to comment Share on other sites More sharing options...
Flaming S Forge Posted January 6, 2009 Share Posted January 6, 2009 Hang in there and keep trying. Eventually you'll get if figured out and you will end up with a piece you will be proud of. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.