Justin Topp Posted February 18, 2020 Share Posted February 18, 2020 Here is a anvil block I made today. About 6 inches of 1.25 inch square stock I forged down to fit my hardy hole than upset down onto itself to form the block. I than forge welded a leaf spring for the face and heat treated. It was originally going to be a mastermyr style Viking anvil but I realized I needed anvil block so now o have one. I suppose I could still take it out drill a hole and hammer it into a log if I wanted. Might try that. Face is around 2” square or a little bigger and it is close to 3 lbs Quote Link to comment Share on other sites More sharing options...
pnut Posted February 18, 2020 Share Posted February 18, 2020 Excellent job. Did the weld go smoothly? Pnut Quote Link to comment Share on other sites More sharing options...
Justin Topp Posted February 18, 2020 Author Share Posted February 18, 2020 Thanks Pnut. The weld went great almost no seam for most of it and it didn’t fall of when I quenched in the water so I’d say it went great Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.