Jump to content
I Forge Iron

Storing Plastech 85P

Recommended Posts

After a lot of reading and a few questions here I decided to take the plunge on some Plastech 85P.  The plan was to use it to reline my waste oil heater for the shop and the left over for the floor of my new forge I am building. I got the box climbed up to the heater to get a brick out for a template and the heater is in worse shape than I thought.  Relining is not going to be all it needs.

I did use a slab to make a floor though.  Now I need to store it properly for the coming summer as I take down and see if the heater can even be saved.  It says to store it in a dark cool place.  I put it in the freezer.  Is that alright?

So far the forge is coming along.  720 inches cubed.  Door is not made yet and only one layer of Satanite liner.  Can't decide on if I will just put two 1 inch burners in it or not.  As Frosty said better to have it and not need it.


forge half.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...