Walt Posted June 17, 2015 Share Posted June 17, 2015 I'm looking for a copy of the setup and adjustment guide for a 90 lb Bull Hammer. I noted several members had a pdf copy available back in 2011. I have a used hammer that I hope to install this summer. The PO had trouble with it smacking the top and went to a Big Blu. From what I have read here, it sounds like it just needs adjustment.Any help would be appreciatedThanks,Walt B Quote Link to comment Share on other sites More sharing options...
Steven Bronstein Posted September 21, 2015 Share Posted September 21, 2015 I am not sure how old this post is, I have a bull hammer and can help you with adjustment. Quote Link to comment Share on other sites More sharing options...
Javan C.R. Dempsey Posted November 18, 2015 Share Posted November 18, 2015 Same here, PM if needed. I've got an old style Bull, and I've rebuilt/repaired a handful of newer c-frame style Bulls. Quote Link to comment Share on other sites More sharing options...
polymath Posted December 18, 2018 Share Posted December 18, 2018 I just acquired a 15yo Bull and am wondering if you guys are still on the board. I will be looking for setting up and use assistance in the near future. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted December 18, 2018 Share Posted December 18, 2018 It would help to know your location, perhaps there is someone near you that can help. Have you read this thread? read-this-first/ Quote Link to comment Share on other sites More sharing options...
Judson Yaggy Posted December 19, 2018 Share Posted December 19, 2018 Steve (above) is still around but posts here infrequently. Still has a Bull. Try PM to get a hold of him. I can get you his contact info if he doesn't respond to pm. Bull turned into Phoenix Hammers, they are still around if you google, perhaps they will feel like talking. Quote Link to comment Share on other sites More sharing options...
polymath Posted December 23, 2018 Share Posted December 23, 2018 Thanks guys, I updated my profile, but just to be complete, I live in Nampa, (near Boise) Idaho. Hammer will be here sometime after Christmas, so once I get it on a base, I am sure the questions will flow. I will try Steve, thanks Judson! Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted December 23, 2018 Share Posted December 23, 2018 You might google Mark Krause Blacksmith. He is a power hammer guru (Hammer whisperer) and is not too far from you last I knew. He repairs all makes of hammers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.