antigoth24 Posted January 25, 2014 Share Posted January 25, 2014 I wanted to get input on my new Wilderness Pack Axe from a design stand point as I will be doing a lot of them with the first run being fifteen. I made a prototype a while ago but wasn't too found of the head geometry so I made some tweaks and here I am again... :P So any input wood be appreciated especially from anyone that does woodwork/ timber framing. Okay so this axe was forged from 1018 and a 1084 bit running back to the eye, the head measures 7 inches long with a 4 1/2 inch long edge and is 18 inches long made from hickory and weighs in at 2 1/4 pounds. In dimensions it is closest to the Gransfors Bruks Small Forest axe with the Gransfors weigh about 3/4 of a pound more. So as far as pack axes go it's on a the light side but I don't think that's necessarily a bad thing. This one still needs my maker's mark, but it will be my personal one to see how it is to live with as that will be the ultimate test of its design. But enough of me gibber jabbing what do you all think? Thank you for your input. Robert Quote Link to comment Share on other sites More sharing options...
njanvilman Posted January 26, 2014 Share Posted January 26, 2014 Nice design and weight. If one is carrying it all day, all the ounces add up. I am sure it will do the job for packing and camping. Quote Link to comment Share on other sites More sharing options...
bigfootnampa Posted January 26, 2014 Share Posted January 26, 2014 The shape looks good to me! I am not a real fan of the mini axes though... I usually have a hatchet or a full sized axe. For cutting in the field a folding saw is a LOT easier to carry and can usually get the job done! Quote Link to comment Share on other sites More sharing options...
homeshow Posted January 27, 2014 Share Posted January 27, 2014 How long is the handle and what is the profile of the head shape? Quote Link to comment Share on other sites More sharing options...
biocmp Posted January 31, 2014 Share Posted January 31, 2014 I think it looks great. How long have you been forging? Any tips for someone looking to learn? Also, how much would you charge for one of these? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.