Matt Marti Posted October 14, 2013 Share Posted October 14, 2013 Hello y'all, 5starhobo (Blake as I know him) and I have been quite busy in the shop the last couple of days. We would like to share some pictures we have taken over the past few days. Please forgive me If I name or call something incorrectly, thank you! Hand tools Blake forged for him self. From left to right hot chisel, bob punch, round punch, square punch, oval punch for 1/2 stock(?) and a oval punch for 3/8 stock (?) While I was working on some other things Blake decided to gather up my hand tools and regrind them. Thank you for that Blake. Blake is making this 3inch fuller upset. Poor thing threw a tantrum half way through. Uh oh the striking anvil is a bit crooked from twisting the 3inch fuller back square. This is the reason why we twist the fullers back square. They get out of align in the forging process, we do not do that on purpose! Here we have a finished 3inch fuller and a 1 1/2inch fuller. Quote Link to comment Share on other sites More sharing options...
DanielC Posted October 15, 2013 Share Posted October 15, 2013 Looks great! Quote Link to comment Share on other sites More sharing options...
Daniel Lea (AKA 99pppo) Posted October 15, 2013 Share Posted October 15, 2013 =) It is really nice to see you and Blake being able to reproduce what you have learned through the summer. Partly that was my teaching and that makes me a bit proud ^__^U. But also Blake did a great job remembering the fuller forging and YOU remembering all that and being able to reproduce and go even further! If you want some constructive critique tell me and I shall advise you, especially on the tongs! Yours - Daniel Quote Link to comment Share on other sites More sharing options...
5starhobo (blake) Posted October 15, 2013 Share Posted October 15, 2013 Yes Daniel! It was a little tricky without the top swages i would have to say ;) Quote Link to comment Share on other sites More sharing options...
Matt Marti Posted October 15, 2013 Author Share Posted October 15, 2013 =) It is really nice to see you and Blake being able to reproduce what you have learned through the summer. Partly that was my teaching and that makes me a bit proud ^__^U. But also Blake did a great job remembering the fuller forging and YOU remembering all that and being able to reproduce and go even further! If you want some constructive critique tell me and I shall advise you, especially on the tongs! Yours - Daniel I would love the critique and tips please. Quote Link to comment Share on other sites More sharing options...
5starhobo (blake) Posted October 15, 2013 Share Posted October 15, 2013 =) It is really nice to see you and Blake being able to reproduce what you have learned through the summer. Partly that was my teaching and that makes me a bit proud ^__^U. But also Blake did a great job remembering the fuller forging and YOU remembering all that and being able to reproduce and go even further! If you want some constructive critique tell me and I shall advise you, especially on the tongs! Yours - Daniel Yes Daniel! It was definately more challenging without the top swages.. ;) Quote Link to comment Share on other sites More sharing options...
windancer Posted October 15, 2013 Share Posted October 15, 2013 Making tools is one of my favorite shop chores! Looks like you were busy AND productive :) Dave Quote Link to comment Share on other sites More sharing options...
Matt Marti Posted October 16, 2013 Author Share Posted October 16, 2013 Striking anvils are supposed to be low so you can get the full force of a sledge hammer blow onto a top tool. With a normal anvils height its hard to get much force on a top tool because its so high up. Quote Link to comment Share on other sites More sharing options...
David Gaddis Posted October 18, 2013 Share Posted October 18, 2013 It nice for us old geezers to watch you young whoopersnappers communicaing with each other about the skills you have learned and shared together. That is an inspiration.Carry on Quote Link to comment Share on other sites More sharing options...
5starhobo (blake) Posted October 18, 2013 Share Posted October 18, 2013 It nice for us old geezers to watch you young whoopersnappers communicaing with each other about the skills you have learned and shared together. That is an inspiration. Carry on Thanks Mr. Gaddis! It was a pleasure to meet you while on my short stay in Mississippi! Hope to see you soon again. Ever think of sending daniel some of that rootbeer of yours? ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.