123samic Posted July 1, 2013 Share Posted July 1, 2013 hi, Im in the prosses of building a stand for my buffalo 210(?) and was wondering how tall the original stands were thanks, Sam Quote Link to comment Share on other sites More sharing options...
123samic Posted July 1, 2013 Author Share Posted July 1, 2013 bump Quote Link to comment Share on other sites More sharing options...
neg Posted July 1, 2013 Share Posted July 1, 2013 I'm not sure how tall they originally were, but you have the opertunity to make it the height that is most comfortable to you. Make it to where you don't have to hunch over or reach up while you turn the handle. Wherever it's most comfortable is where it needs to be. You'll be cranking it a lot. Quote Link to comment Share on other sites More sharing options...
Frosty Posted July 1, 2013 Share Posted July 1, 2013 Without knowing more about your forge set up how do you expect us to know? make it fit what you're hooking it up to, if that's not important make it a comfortable working height. NEG has that right. My blower fits the forge on a dovetail so there's nothing to do but set it and go for it. You might want to make the stand with a wide enough footprint to be stable but small enough so it doesn't get in the way. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.