Raiser308 Posted January 21, 2013 Share Posted January 21, 2013 My post vise is not aligning properly what should I do Quote Link to comment Share on other sites More sharing options...
jeremy k Posted January 21, 2013 Share Posted January 21, 2013 A half dozen pictures from different angles will help to tell you how/what needs to be done to help you. Quote Link to comment Share on other sites More sharing options...
SReynolds Posted January 22, 2013 Share Posted January 22, 2013 I have had to fight that too. It really helped to replace that awful pivot bolt. When I replaced that with a regular through bolt and locking nut it tightened up the jaws some. One was still pushed off to the side a tad (1/8th inch or better) and so I took a long heavy sledge hammer to it and it did move. I see this quite a bit in this style of vise. It must be normal and from what I see in visiting shops, folks don't worry about it. It does bother me to no end as it isn't "right" and wish I could have taken a picture of the last one I saw. It was so bad............ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.