Mad Dawg Posted February 9, 2012 Share Posted February 9, 2012 Heya Guys, I finally made my first knife. It's made on a pattern welded billet that I purchased on eBay. I made a couple of mistakes being it's my first time, but I am very happy with it... if it survives the quench I'll be stoked! You cannot see it in the pic, but the patterning on the blade is very nice... much nicer than I expected. I have some Cocobola scales for it. Still haven't decided on exactly how to finish up the handle, but it's just a couple of small tweaks. Anyhow, I hope you guys like it... this is my first "non-scrap" project. I just built an H-press with an air over hydraulic jack for making damascus billets... I dislike buying them made... would prefer to make my own. I hope you guys have a nice day, Mark Quote Link to comment Share on other sites More sharing options...
Mad Dawg Posted February 9, 2012 Author Share Posted February 9, 2012 Hello Guys, Maybe some of you can help me with procurring steel? I called all of the local steel distributors and they all acted like I was speaking another language when I asked for steels for knifemaking. Maybe I am calling the wrong places, so any tips on locating steel sources locally would be appreciated. The phone calls did pay off as I got into a conversation with a gentleman who gave me contact info for a guy who can sell me various grades of high tension elevator cable. Possibly even get scrap for free. I'll see how that goes... any how... any info on buying steel would be appreciated. I am trying to get it locally in Vegas and avoid purchasing it online. Thanks, Mark Quote Link to comment Share on other sites More sharing options...
Mad Dawg Posted February 10, 2012 Author Share Posted February 10, 2012 I figured I should show all views of the knife so here are a couple more pics... You can clearly see some of my mistakes in these pics... I hope to do much better on my next project. Thanks for looking and constructive criticism is always appreciated. Later, Mark Quote Link to comment Share on other sites More sharing options...
Rich Hale Posted February 13, 2012 Share Posted February 13, 2012 Matt youi may wish to try knife making supply places. Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted February 14, 2012 Share Posted February 14, 2012 what country may help. since you don't tell us where you are, makes it next to impossible to help.. you sorry. Quote Link to comment Share on other sites More sharing options...
MattBower Posted February 14, 2012 Share Posted February 14, 2012 Well, he did mention that he's in "Vegas." I only know one place commonly referred to as Vegas. I suggest you get in touch with JPH (Dr. Jim Hrisoulas) on this forum. Dr. Hrisoulas is in Las Vegas. If it's possible to buy blade steels locally, I bet he'll know where. Quote Link to comment Share on other sites More sharing options...
Mad Dawg Posted February 18, 2012 Author Share Posted February 18, 2012 Thanks for the reply guys. I did find some available on line, but the shipping costs were high. Seems I'll be able to get plenty of elevator cable at the scrapyards, but I'd like to move on into known materials. Thanks for the suggestions. Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.