October 16, 201114 yr i have been thinking about making a ring (similar to a wedding ring)like a section of pipe that fits around the fingers, so no gap, how is this done? thank you monty
October 16, 201114 yr Monty,i'm sorry,but the question as stated is somewhat odd: TECHNICALLY,there's any number of ways of forging a ring;mainly,punching and drifting a solid,or welding a strap into a loop. CHEMICALLY,an iron ring may react with the human body in an undesirable manner.I believe that most iron/steel objects that are meant to contact with the skin are lined with non-ferrous metals(the lining can be effected mechanically,or by means of galvanics-electrodeposited). Sorry,it's all very general information,but so was the question... Best of luck
October 16, 201114 yr id make one out of silver - either cast it, or as i would choose, solder a strip shaped in profile as you like it, like jake said, in a correctly sized loop. you can buy very cheap plastic ring guages which are very useful for getting a good fit!! good luck :)
October 19, 201114 yr Author thank you for replying hopefully i will have at least mild success Monty
October 19, 201114 yr If you are interested you can use alost wax casting process. Suppliers will sell you wax rlings or the wax to make your own. You can carve add wax or wotever you wish to get the ring the way you want it to be and then have it cast in silver gold or wotever you wish.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.