hounddog Posted December 8, 2009 Share Posted December 8, 2009 i can get a 3/4 inch h bem will that work for a anvil?? Quote Link to comment Share on other sites More sharing options...
David Einhorn Posted December 8, 2009 Share Posted December 8, 2009 Depends on what you want to use it for, and the cost. The more mass under your hammer the better. It will do for some stuff, but you will not have a horn to work with. A discarded fork from a forklift would likely be more useful. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted December 8, 2009 Share Posted December 8, 2009 Or a sledgehammer head mounted into a stump---there is a video out there of a fellow in Asia using a sledge hammer head for an anvil forging knives for commercial sale. Note too that the I beam will be LOUD! Quote Link to comment Share on other sites More sharing options...
Rob Browne Posted December 8, 2009 Share Posted December 8, 2009 Or use the H beam on end to mount your sledge hammer head to a more convenient height. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.