Hi,
Just hoping to hear some feedback about a welding company called Longevity. My old Lincoln TIG welder just quit on me, and I was surfing the net looking for a good buy on a new welder. I came across a company called Longevity. They seem to have pricing and warranty that is unsurpassed for there equipment, but I have never heard of them.

Here is there Link:

Plasma/Metal Cutters welding equipment.

Here is the Link to the specific machine that Caught my eye:

WeldAll 200PI


Let me know what you guys think and know.
Thanks.

You can find several names on flebay. Same equipment mostly china made.
Ken

I just made a purchase of this machine through a Longevity sales rep over the phone. I checked out Ebay and found some similar machines Like there's but none Identical to the this machine. Also, most of the ebay sellers offered only a 1 year warranty. Longevity offered me a 5 year warranty + a 30 day satisfaction guarantee on the machine. The rep over the phone was able to discount the machine for me + give me a discount on consumables and tungsten rods for the tig torch. I will try the machine through the 30 day trial and post a review.

here is the correct image for this machine. posted the wrong image before.

I thought you were starting a debate about how long welders live for:D:D
The welding plant is Chinese BTW.

Hi. There is a lot of back and forth about this topic on weldingweb

Pictures coming soon. so far the machine is coming along just fine. The machine is made in china, but so far, the machine is shown me nothing but quality welds and cuts. It seems to be a pretty solid unit all in all. Ive made a **** load of practice welds and cuts with it so far, and it has not hesitated. Ill post some of the welds that I have completed with it so far as soon as I can fine that darn camera!
Keep you guys posted.
Thanks
Ed

Edward, china made is not always bad. I belive if it works for you non commercial it works. While I do look for USA equipment. Is a $2000 usa tig welder needed for 5 hours a yr of use I think not.
Ken

Here is a cut that I made with the plasma torch for a friend of mine:


1/4 square tubing.
Machine was set to 25 amps.

I certainly agree with you Ken.

Here is a TIG practice weld that I did on some 1/4 inch mild steel. Not a complete weld, but it demonstrates the quality of the contstant HF. This machine starts an arc with the hand activation on the torch. I did this weld without the foot pedal that came with the machine. I am able to set the current directly on the machine. When I plug in the foot pedal, It takes over the amperage control of the machine. The amperage can be limited with a control knob on the foot pedal.