_Jake_ Posted August 5, 2009 Share Posted August 5, 2009 Hey this may not be the right place for this post but I am a student around the rochester/syracuse area studying metals and just got back from classes at penland and am looking to meet local smiths in the area. Anybody from around here or know anyone, let me know. Thanks. Quote Link to comment Share on other sites More sharing options...
Mark Emig Posted August 5, 2009 Share Posted August 5, 2009 Hi Jake, I'm down in the Hudson Valley, but I'd suggest that you try the New York Designer Blacksmiths. Very active ABANA affiliate. Check their website for more info. It's also listed on the ABANA website under affiliates. Take care, Mark Emig Quote Link to comment Share on other sites More sharing options...
Dragons lair Posted August 5, 2009 Share Posted August 5, 2009 Jake wish i knew earlier. you were about 1 hour up the road. Spruce Pine is almost like upper NY. OOPs thinking NE not NW. Used to visit a lot when I lived in Conn. Welcome aboard. Ken Quote Link to comment Share on other sites More sharing options...
double_edge2 Posted August 5, 2009 Share Posted August 5, 2009 hey im not quite a beginner and just about 45 degrees down to the left a few inches on the map ...apparently...... i have my own company canoe..... Quote Link to comment Share on other sites More sharing options...
Jeff Bly Posted August 11, 2009 Share Posted August 11, 2009 There is a shop of a somewhat well known smith down around your area somewhere. I'll see if I can dig up info for you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.