Angus Posted March 15, 2009 Share Posted March 15, 2009 I found some of that pcb mother board ether and used it but didnt work quite the way I thought, I let it sit in there for about 30 -45 minuts looked pretty good except for a few dark spots left on it. How do I get away from making those spots. Oh ya, i made the knife out of cable Angus... Quote Link to comment Share on other sites More sharing options...
Steve Sells Posted March 15, 2009 Share Posted March 15, 2009 got pics? spots could be from oils that were not cleaned off, or burns from forging, also could be from un-even hardening. among other things. Quote Link to comment Share on other sites More sharing options...
Angus Posted March 15, 2009 Author Share Posted March 15, 2009 You know it might of been from to much heatlike you said I did get the tip a little to hotand had to cut that part off and redo it. Thanks for the info. Angus Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.