Search the Community
Showing results for tags 'scissors'.
Found 2 results
I have just completed my first scissors as a practice, I intend to make more but out of pattern welded steel. Those were forged from 2 grade 12.9 counter sunk bolts. At start I had forged and partly ground the taper the wrong way but was able to correct the mistake I have removed the thread as this is bad for cold shuts and removed the tapered head for ease of forging as well
Brand new here, but I thought I might jump into it. I have some annealed 1/8" 52100 flats that I was hoping to use for a pair of pruning shears for my foreman at work. And yes, I'm familiar with how 52100 forges. I've made a few knives from it. It's just that I've never really spring-tempered anything before (as shown in the design). As far as equipment, I have a break drum coal forge, a few punches, wolf-jaw tongs, a straight peen hammer, some hot cut chisels, a rail anvil, and a low speed bench grinder with a sanding attachment. With what I have, how do you think I should best go about drawing it back? Should I use a different steel in regards to the spring? Also, if I'm not being clear, if I'm leaving out some important details, or if you're just curious as to why the heck I'm asking, feel free to let me know. Thanks for the input!