-
Posts
331 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Benona blacksmith
-
-
May I ask one more thing? Would it be possible to get some spec sheets from a couple more batches as your work receives them so we can do some comparative research to see how close of tolerances rebar has?
-
Awesome....thank you!!!
-
On 1/22/2019 at 5:16 PM, BCoffman79 said:
I work in a rebar fabrication shop mainly I use the scrap to make knives
As in a rebar manufacturing plant? If so can you find out specs on the rebar?
-
-
The simplest way would use one of the hammer handles I already have but thanks for the suggestions I appreciate it.
-
-
I will dig through the handles I have and see what I can come up with. Thank you for the help and suggestions. I would like to see the thread you talk about. If anyone could find it I would greatly appreciate it.
-
I have a box of hammer handles. I was thinking there was a handle out there that was already set up for a round eye.
-
I was really hoping to just buy a handle. I work a lot and what spare time I have I wanna be hammering instead of making a handle. I do have access to some black locust but like I said I really wanna just buy one. If I was left to have to make a handle it would just sit around and I would never get to it
-
-
Looks like a Vulcan
-
On 12/24/2018 at 10:50 PM, Illya said:
then when you bring them to yellow heat, flux, the sides
If your NOT running a reducing atmosphere you are going to want to flux before a yellow heat because scale will have already formed between the pieces you are trying to weld.
-
I'm in the same predicament....only my block of steel is 3000#.
-
How much air supply do you have at you disposal? With an anvil that heavy you could easily go with a little bigger cylinder and tup. But a bigger cylinder means you need more air. Just a thought I figured I would throw out there.
-
Should be around 156#
-
There is 2 forman's....they look like twins. Look at the guy swinging the little ball peen hammer at the giant bracket that was mentioned. Look between his head and the hammer.
-
There is a small french pig style anvil in there too.
-
I see a big helve hammer in the back to the right of the door. Really cool picture and the picture on the website is incredibly clear!!! Thanks for sharing.
Tong ID help
in Tongs
Posted
https://www.iforgeiron.com/topic/60309-mystery-tongs/