draper84
-
Posts
86 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by draper84
-
-
to make matters worse...the cable knife i was making was destroyed today! i was heat treating and i had to run to get a wire brush. and when i got back maybe 20 seconds later my knife was burned and ruined
-
thank you all it is still hard no matter what
-
I had been working on a cable knife for my best frined who was the best man at my wedding and my greatest frined since 6th grade, and he passed away yesterday. this is a great loss to me because he helped me through my parents divorce and i practically lived at his house for a year. He will be severely missed
-
or a pirate making a PACT with Davy Jones
-
sorry i meant billet when i said ingot. sometimes the words don't come out so easily.
status: 1.5 inch cable successfully welded into 1 inch rod -
I have finally made my piece of cable from many small pieces into one large ingot so to speak, i was wondering if fluxing with borax could cause corrosion later on down the line. Should i soak it in a bath of some sort of cleaning agent or something?
-
-
first of all beautiful blade
does stabilized mean that it will not split, if not what does stabilized mean, sorry -
Cost --the price to pay for an item
-
Chalk another one up to inattentiveness
had just adjusted the tongs to fit the piece i was working, and while the reins were cool the jaws had just been red hot a minute ago. i set them down, and when i picked them up i slid my hand up the reins toward the jaws to the sound and smell of burning flesh. -
Ok. Thank you very much. I'll think of some other metal. In another project, I'm making another knife from about 100 year old buggy springs. This metal seems to be very tough. I should have known about the wrenches being built for toughness rather than hardness.
-
oh the craftsman is broken ( i know i know i can go back and get a good one), but i thought that the steel would be good quality
-
i've been mulling this idea around in my head for a little, i tried to look on here for any ideas, but couldn't seem to find anything. i'm thinking of making a knife from an old craftsman ratchet i have. I realize the fumes will probably be toxic, but i was wondering if anyone had done this. Or had any ideas with the process...thanks
_eric_
also a while back i asked for some cable. to great dismay i have lost the address and name of the person who shipped it to me in my move. i am terribly sorry and would like to pay that person back plus some, if that person reads this please PM me -
Excellent question i was wondering the same thing. i have the same book. but i probably wouldn't work with it, i don't have than much experience with high alloy steels.
p.s. i read the drizzt books too -
good luck, and you're prayed for
-
chalk this up for the worst thread hijack ever!!!
all in good fun
i'll never stop the flow of good information -
Man you always do such nice work!
-
I had thought of making some of these, i'm sure lots of people i know would love them, myself included nice to see that great minds think alike
-
Metal Shavings
-
Tommy Lee...
-
Yawn - what usually happens when i am listening to someone spinning yarn
-
Erin---my little cousin's first name
-
wow move this up on my like list! great work
-
Draper, what size cable you looking for?
i've been looking for half inch to any size bigger but have found nothing, the bigger the better inch and a half would be great.
My stock removal knife...
in Knife Making
Posted
gorgeous work