Azur Jahić

can you put video of this kinf bellows here is mine is this work good

i think that is because i put plastic instead of sheet metal on one parit you can see in the midle i put out bellows and i making sheet metal and i will see result

ok i will take video and show how it wor is it enaugh air i have some sugestion that rubber can get burned
and problem is that uper tube is empty no air goes in upper tube i dont know what is purpose of up inner tube

its falling allways when i put and i can use only down innet tube up inner tube is just reservoar can i use up and down inner tube in same time if i do i can make real good air

this turn out dont work :angry: can i put this thing on the land can you say me how much air i need not in number but simple how it must blow ANd one blacksmither said me that rubber cant use in forge because it will burn like hell

i lost some bearings from my drill wil that cause problem and its a lithle easyer its like i put on 1st speed but crank stay on 2 speed can i make a drill speed bether than usual

can i change the side of bellows i think to up inner tube put down and down inner tube put up because up inner tube is much stronger then down inner tube .up Inner tube is need just for the reserve air and i think up is bigger then down can i replace side will that change something

im seting up it how much must blow air

thanks i will secure that bether because it almost hit the ground and i think its heavy i must make balance

final picture when bought tin snips the job was half done

yes i will take a picture ok here it is

Ok i have old breast drill but i released that i will have more pover if i convert it to bench drill and by the way i have some vice . and i think i can make the vice hold object and drill to make hole in steel.IF i convert my breast drill can i drill a steel i can drill a wood with my drill but iam need to drill iron or steel.

i dont find tips to make blowers i only find axle option how to make axle how to heat treatman i find how to make bob i look at book , can you tell me on how page is bellows show

i have metal sheet but i dont have sissors for metal i have hack saw but i think its hard to cut metal preciesely do you have difrent way instead use hacksaw or sissors

i put leather instead of rubber

guys can i use slim (thin) peace of wood instead sheet metal to atach iner tube on plywood

i will try with rasp because i hammered this and its have flap inside i cant pass trough "when i wide the hole will air escape

my progres with bellows it"s half done only i need atach iner tube of cars and make frame which is easy this was the hard job

what you think about this bellow http://www.iforgeiro...attach_id=45841
can this thing work http://www.cd3wd.com...ths_bellows.pdf

people doy you thinll this bellow can work

you must kiding me that this thing work i thik it is small:D Is it a plastic
do it melt if you using no offence funnel go to forge

i found something nice to make IT is not too dificult http://www.cd3wd.com...ths_bellows.pdf
do somebody try to use this bellows it seems to me that this below can have a sence
I think this draws have logic http://www.cd3wd.com.../en/bsforge.htm ok it look like this

mijeh.pdf

I think i will have a patience and find some material to make project works good:BEther to not rush.Because i have a lots of plans in my had .And i"m hoping that once of them will work.

http://dogonlanguage...ga_juuri_JH.jpg i have old bycicle i thin to make bellows usin power of the bike
puting tube on wheel and make like hand crank bellow by the way my hair dryer is break, it over temperaturing and get red and break up.And i deside not using electricity But i can made iron to get red colour with hair dryer. I dont see this picture clear but i think i have material to make hand crank blower with bicycle part can you explain me how i can i use old jacket to make bag bellows and can you sand me a lin of that book i type on google and i dont find

http://www.mtforge.com/Congoarchives.htm

yes i see on ehow page but i dont know Is the easyer to make box bellows or the board bellow with leather

but VaughnT tell me that i can make bellow like box I think it is easyer to make bellows from pipe than use two board and atach leather on it vith nails HOw japanesse use box bellow that not destroy thair fire Iam lithle confused now

VaughnT

you mean something like this