Azur Jahić

i have some press board i think i will try to make a box bellows

can you say a dimension

i make this fan using jigsaw press board and i crank it with my breast drill but i think its need more details

i heat steel without bellows can you guys explain me how i do it

i make one rib and its a 150 cm long and a 30 cm wide is that enaugh because i think its a lithle because its neat

so i reliased when you try to make steph to to get air again air wont be sucked because it wont have a time because pipe is long

i see this kind of bellows but its unbelivable http://www.dreamlandproject.se/?p=517

yes i was thinking that leather (Canvas)go into chamber that is it like when i try with inner tube ithink that is perfect example
the inner tube go inside and make sutuff harder to work

why someone make bellows ribs but some folks make only 3 boards for bellows what is purpose of that 2 or more ribs.what will be without a that ribs i think i a bit know .WIll the cloth of bellows go into a chamber without a ribs

ok

ok my breast drill have to speed wich i use it i use only one speed i put crank on secont shaft but what is purpose of first axle

how you mean to use carboard to make bellows

i get some idea i rotate my bellows and attach one piece of wood on it and i make portable i think iwill get more air if the bellows are in some kind of gravity force

i have some powerful air blast and then nothing some charecoal was blow away but i dont have a pipe for nozle may be this is for that and i will make another bellow for this.When i was working with hairdryer the sparks was be all of the place can the sparks can be a measure for charecoal forge if sparks dont go is that mean that air is not strong enaugh . CAn i make something like this portable bellows i mean will ti blows good
http://www.youtube.com/watch?v=KGzurmC5IJQ&feature=related

do i need to make just like this another bellow

i have some draws
http://www.iforgeiron.com/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=47300

is this air enaugh

my bellows test http://www.youtube.com/watch?v=eXZcz1aTStg&feature=youtu.be

videohttp://www.youtube.com/watch?v=CS03qZ1DF20&feature=youtu.be

i make my new bellows using inner tube of car and some timber but when i make it my inner tube was too short and i cant good seal it around nozzle

iam prepare to make bellows some material need to come

i have a sledge hammer will i break it if i hiting it on hammer

i FOUnd on internet a water bellows :Example you have to drum or bucket one is have a two hole and one have a water inside .i have some draws , DO you have some videos how is this bellows work they look easy to make

this is water powered mill who heat that fire and make energy for hammer

yes i think i can make a knife on this shaft or on stone without craking stone in my eyes