-
Posts
1,813 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by yesteryearforge
-
-
-
What I usually do is brass brush it untill you are satisfied with the finish and when you get it just where you like it ( Quench it ) and it will remain at that state of finish.
Some time I will let it set there a few minutes and watch the color transformation and quench it to stop the color where i think it looks the best.
I usually shoot it with clear laquer instead of the beeswax mixture
-
I have put a one inch square hole thru 2 inch thick hot roll before
Drilled a 7/8 hole
Heated the 2 x 4 x 10 inch long bar to a yellow heat
Me and a striker the drove a pre forged 1 inch square drift with a long taper made from A36 thru it in two heats
we were making a brian brazeal type anvil for making hammers
-
Welcome to Iforgeiron
-
Nice job all around
What jmcustomknives said
-
Peeled back to the Basic definition
If you smite the Black Metal you are a BLACKSMITH
-
Nice Job
Welcome to Iforgeiron
-
I punch Hammers with the handled punch that I got from Brian on my Iron Kiss in just two heats and its only the 50 # Iron Kiss
These start out as round stock but dont finish up as a rounding hammer
-
My personal opinnion Is you would be hard pressed to find a finer anvil no matter which one you choose.
I have a # 9 and a # 58 but both have the side shelf.
-
Welcome aboard
-
Im a Low tech man in a Hi-tec world
Ive noticed that in the majority of students that come thru the school are I T people
Its like they woke up one day and realized that there is something on the end of their arms and they can use those things to MAKE THINGS.
I attribute the surge almost soley to the internet and videos.
-
I have a website
I also use etsy and Ebay a lot
I used to be on ( the face of the ME generation book ) ( facebook ) but couldnt take that any more so I deleted that.
The website has links to it from my ebay listings and etsy is just kinda there..
-
As Hwooldridge said
I always heard that design refered to as a Chop Fuller
I have one and use it a lot
-
Welcome to Iforgeiron
There is a wealth of information here
Look around ,ask questions , post answers and enjoy
-
Very nice Anvil
-
ETSY is pretty much useless
I think you have a pay to bring your items to the forefront or it remains burried so deep no one will ever find it.
Ive been on there a couple years and even I cant find my items unless I go to my storefront
-
Thats pretty good if under 10 minutes for a pair of tongs.
If it was 9 minutes thats about 4 1/2 minutes per side
Thats FAST
-
my fovorite method is ordering them online
-
nearly 2,000.00 a ton is a little high dont you think ?
-
I fired two of Wallaces guns in 1969
Also had the Colonial Williamsburg gunsmith demo for us here and he hand forged a section of rifle barrel. and part of a lock and buttplate.
Amazing stuff and gives you a whole lot of respect for what can be accomplished by hand
-
Thanks
I had never heard of it and think i'll search it out and give it a try
-
I googled PPG breakthrough but couldnt tell if it was available in spray cans or in clear
-
Bigfoot please define Breakthrough
Mike
-
Nice Job
Peter Is an exceptional Smith and it looks like you executed the design very well
90 Degree hardy bick
in Tools, general discussion
Posted
Heres several photos of other styles. --- .