pascalou

Too funny !!!!!!!!!:D

Thanks Cegga

Hello Cegga ....What steels you use to get as strong a contrast? (I understand that I am the 3rd to ask this question)
Super work !!!!!

Joyeux No

Very appreciated by the chefs
Good work

The idea is good!! Definitely I like much this forum where each one divides

very nice looking welds. Do you have a platform to stand on when using it, as it is pretty high above your anvil.

soudures de regard tr

Hello, here a further information: length of the slides diameter 16:
- 1 of 300 mm
- 1 of 270 mm
tThe slide of 300 exceeds lower part of the base of approximately 30 mm to enter the hole of the anvil. tThe width of the fixing of the base depends on width of the anvil.
Some sketches............in French
Good do-it-yourself with all.
A+ PL

Hello, here the fuller which I have just finished. Not too much English text, for not abimer your nerves:D. I hope that the photographs will be explicit.
A+ PL

Hello......... and thank you ..... For Skunkriv: the ears are of a part. I joined a small drawing .......... A+ PL

Hello ... a gleam of flame of Un lighter.... Small cauldron 25 cm in diameter and 12/10 thickness, riveted with "the old one". When I would have courage, I would polish and I would take in photograph the next subject. A+ PL

super work!!!!!!!!!!!! ......Hop! in my favourites
A+ PL

That is a very nice looking anvil. Where are those made? The only ne I have ever seen with feet like that was a photograph of a medieval piece.
Finnr

Hello with all, if I included/understood the question..... the square hole is useful for the "stamps" and the round hole of the top crosses the anvil, I makes use of it to place forms or my "third hand". The translation of the word for word text is sometimes surprising.
A+ PL

here is with a text runs. I hope that the photographs will be enough .:confused:
welding used:baguettes coating protected "B

super work, I like much the shape of your knives. The line of hardening of your Damas is remarkable.

Hello, thank you for the comments. Here people are quiet...:cool:. I would post other photographs of work out of copper
A+ PL

If your workshop is a too small here trick "to play the 4 corners" .....box + sand + anvil = approximately 230 kg
PL

superb.....je thinks that all the templiers of the time tightened proud to have such a beautiful knife.

Hello, thank you, Jeremy K, Gerald, Sdalcher, Leah, Agsolder, Bentiron1946, and Cracked for your appreciations. (For Bentiron1946:je forms copper only for the pleasure and only very little sells any......... if not counts approximately 40,45 euros of the hour) A+ PL

super travail ,le relief est remarquable .Apr

Hello JK I spent approximately 60 hours for copper and a 20eme of hours for the bronze handle,le drawing and the steel shapes are in more......... j' hopes that the text is comprehensible because I pass through the translator "Babel fish". A+ PL

hello with all here some photographs of a ewer which I formed out of copper

Thank you for your reception,et for the bond for the translator. good fire and good forging mill! A+ P L

Bonsoir