kovacija(blacksmith) Posted November 12, 2008 Share Posted November 12, 2008 I have all the instructions on using one and understand everything but: the settings are in psi and my question is how do I set setting in Bar? and how much is it for cutting ? 2:1 in oxy? european setting are in the Bar... Quote Link to comment Share on other sites More sharing options...
LarryM Posted November 13, 2008 Share Posted November 13, 2008 kovacija try this link it will convert psi to bar for youOnline Conversion - Pressure Conversion Hope this helps ya Larry Quote Link to comment Share on other sites More sharing options...
kovacija(blacksmith) Posted November 13, 2008 Author Share Posted November 13, 2008 as always Thanks again Larry!!!:cool: Quote Link to comment Share on other sites More sharing options...
racer3j Posted November 13, 2008 Share Posted November 13, 2008 I never set by a specific number, even on my Dillon. Unless you have very precise gauges, they are not really telling you anything but self-contained relative pressures. Set for the flame you need-neutral for welding taking into account tip size. mt Quote Link to comment Share on other sites More sharing options...
kovacija(blacksmith) Posted November 13, 2008 Author Share Posted November 13, 2008 ok so that menas if I need some sort of flame I just set it on my one? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.