Swadly Posted April 29, 2019 Share Posted April 29, 2019 This is a rough drawing of the burner. I have been reading a lot on the forums and got Mikes book! The reducer has been ground and sanded to a small funnel to increase the Venturi effect. The rest of the burner is basically Mikes 3/4" burner! Any thoughts or suggestions would be greatly appreciated. Great place to learn! Thank you Swadly Quote Link to comment Share on other sites More sharing options...
Mikey98118 Posted April 29, 2019 Share Posted April 29, 2019 Actually, that is closer to a Hybrid burner than a Mikey burner. Quote Link to comment Share on other sites More sharing options...
Swadly Posted April 29, 2019 Author Share Posted April 29, 2019 I value your opinion Mike! Do you have any comments or suggestions? Quote Link to comment Share on other sites More sharing options...
Mikey98118 Posted April 29, 2019 Share Posted April 29, 2019 You forgot to include a spacer ring between the mixing tube and your flame retention nozzle. You don't show beveled rectangles as air entrances; they are only slots. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.