Jump to content
I Forge Iron

100HT Ceramic Coating


Recommended Posts

The container my product arrived in was broken. The coating at this point is somewhat moist and provides some, but little resistance to finger pressure. I have stored it at this point in an ex butter container in case the coating is still functional. Its a little harder than drywall putty. I think mixing it in water will keep it functional.  Pictures were taken in case a replacement is needed. 

But just in case, I'd like to ask you professionals and professional advisers if applying a coat of this stuff thats been exposed to air before mixing will affect its intended purpose. 

Link to comment
Share on other sites

Welcome aboard Hunter, glad to have you. If you'll put your general location in the header you might be surprised how many of the Iforge gang live within visiting distance.

That's ITC-100. Add clean water till it's the consistency you like and apply it to the dampened refractory. As per Mikey's advice adding food coloring to the solution lets you see how well it covers. I think it's a darned good idea.

You can dilute it enough it'll spray in a spray bottle just keep shaking it.

It's not a time sensitive product in the can, jar, etc. it's basically kaolin clay and zirconium silicate of various grit size depending on the specific ITC product.

Frosty The Lucky.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...