Tom Butler Posted February 21, 2008 Share Posted February 21, 2008 :)i use a industrial pipe bender,iv`e made a format for it,i use 25mm box for the frame of the gates,so i tac the 2 lengths of box together,underneath the top arch about 200 mm i put 25 mm x 6mm flat bar so i put the 2 lengths of flat bar in the middle of the box tac it all together and then put it all in the pipe bender and bend it into shape,then both sides of the drive gates are the same.:) Quote Link to comment Share on other sites More sharing options...
markb Posted February 21, 2008 Share Posted February 21, 2008 Electricians bend conduit with this formula very accurately.Segment Bends Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.