Tom Butler

:)i use a industrial pipe bender,iv`e made a format for it,i use 25mm box for the frame of the gates,so i tac the 2 lengths of box together,underneath the top arch about 200 mm i put 25 mm x 6mm flat bar so i put the 2 lengths of flat bar in the middle of the box tac it all together and then put it all in the pipe bender and bend it into shape,then both sides of the drive gates are the same.:)

:)i use a industrial pipe bender,iv`e made a format for it,i use 25mm box for the frame of the gates,so i tac the 2 lengths of box together,underneath the top arch about 200 mm i put 25 mm x 6mm flat bar so i put the 2 lengths of flat bar in the middle of the box tac it all together and then put it all in the pipe bender and bend it into shape,then both sides of the drive gates are the same.