Slayer63 Posted April 10, 2014 Share Posted April 10, 2014 Fished my firts forge the other day. Could not get the regulator to adjust but with the addition of some compressed air I got the flamr adjusted properly. Here it is. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted April 10, 2014 Share Posted April 10, 2014 What kind of regulator were you using? Quote Link to comment Share on other sites More sharing options...
Slayer63 Posted April 10, 2014 Author Share Posted April 10, 2014 Its a "Lancaster Lanterns" 0-30 psi reg. I bought it from the amish up north. Quote Link to comment Share on other sites More sharing options...
Slayer63 Posted April 10, 2014 Author Share Posted April 10, 2014 It seems to work just fine with a 100lb tank. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted April 10, 2014 Share Posted April 10, 2014 What's the ambient? Also the smaller "bbq tanks" are known to sometimes have problems with their flow checks---mandated so that it shuts the gas off in an "unconstrained flow" situation---well a forge burner can look like that if you turn on the gas fast. Bigger "commercial" tanks don't have them. May want to try the smaller tank again and slowly open the tank valve. If still having problems---well a tank exchange can sometimes help---make sure the one you get has a good date stamp; because re-fills are cheaper than swapping! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.