123samic Posted June 23, 2013 Share Posted June 23, 2013 Hi I was wondering if I could get any suggestions on what to use for a firepot on a charcoal forge. I've been researching an don't think that a break drum will be deep enough (please correct me if I am wrong). I am also on a tight budget so I cant buy a commercial firepot. Thanks, Sam Quote Link to comment Share on other sites More sharing options...
Stephen Olivo Posted June 23, 2013 Share Posted June 23, 2013 side draft out of clay is really inexpensive especially if you dig the clay yourself :D Quote Link to comment Share on other sites More sharing options...
Harris Snyder Posted June 23, 2013 Share Posted June 23, 2013 You could deepen a brake drum by stacking fire bricks around it. Also, I recommend lining the bottom with clay to make it less cylindrical and more tapered like commercial coal fire pots. Look at commercial fire pots from Centaur Forge or other similar places, and then try to imitate the shape, but a little deeper. Even better, cast one out of refractory cement, or weld one up out of steel. I don't recommend side draft, personally. I couldn't get that setup working decently. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted June 24, 2013 Share Posted June 24, 2013 Dig an extra shovel full of dirt out of the hole in the ground? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.