midnightblue69 Posted December 31, 2012 Share Posted December 31, 2012 Hi everyone! There is a local auction tomorrow and they are listing an anvil, the listing says it weighs over 200lbs. I emailed the auction house and asked if there were any markings on it and they replied "There is an R on each side underneath the horn. No pound weights or any other markings." I searched some and found nothing. I am attaching a pic, I'm not sure if it's the picture or not but it kind of looks like the facemay be bowed some. Does anyone have any idea as to the brand? I don't believe I would pay a lot for it but I'd like to be armed with a little more info. Thanks!! Quote Link to comment Share on other sites More sharing options...
postleg Posted December 31, 2012 Share Posted December 31, 2012 Looks like a decent anvil. edges look good and over 200lbs is a good size. I would go look it over check the ring and rebound and if they are good I would go for it. Just remember auctions are emotional events don't get carried away look it over set your price and see how high it goes. I have never bought an avil at auction as it seems there's always some one who has deeper pockets then I do. Just from the pic and discription I could see it selling around the $400 mark at least in my area. Quote Link to comment Share on other sites More sharing options...
Frank Turley Posted January 1, 2013 Share Posted January 1, 2013 Not sure about the R's, but on most Hay-Buddens there is a single number in the waist, under the horn, next to the handling hole. Quote Link to comment Share on other sites More sharing options...
rapula Posted January 1, 2013 Share Posted January 1, 2013 Looks very much like an English anvil. Quote Link to comment Share on other sites More sharing options...
rapula Posted January 1, 2013 Share Posted January 1, 2013 At the waist, the first number could be a zero, so may not be that heavy. Quote Link to comment Share on other sites More sharing options...
midnightblue69 Posted January 5, 2013 Author Share Posted January 5, 2013 Well I went to the auction and long story short, the anvil turned out to be 325lbs and sold for $675. It was in decent usable shape, rang good, well used but not abused but definitely not pristine. The auction was in Shenandoah County Virginia which is still stuck many years in the past, good and bad. However it turns out that there are a number of prominent blacksmiths in Shen co(Makes sense now) When I saw several people standing around it discussing anvil manufacturers and history like their mothers could quote The Old Testament, my hopes started sinking. Everyone agreed that the anvil was not a 200 pounder' and they had several of the early flat feed scales being auctioned so they weighed it. Indeed it was 325 on two scales. I saw deal after deal after deal get sold between 8am and noon so I was still kind of hopeful but when the anvil was up I blinked and it was at $400 and settled on $675. I bought some things but still left bitter not only for the time spent driving an hour and waiting on that anvil in vain but for things I wish I snatched up but didn't waiting on that anvil. Those flat scales all sold for $50 or less and saw some incredible deals go by. What I did buy that was pretty cool was several lots of old wrenches and tools. I bought about 8 beer can flats full of old American wrenches with the intended purpose of forging them into cool things. When I got home I found about a half dozen old black wrenches with the Ford script on them and I started doing some research. The Ford script wrenches were from Model T era factory tool kits. As it turns out, about half of the wrenches were Ford factory tools of various old manufacturers from between the turn of the century and 1940. While they are not worth a fortune, I don't think I will be beating those into candle holders... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.