Thanks for taking a look

They are heavy (1lb 12 oz).
It is 5 3/4" long x 1 1/2" wide x 1" thick.
Hole goes all the way through

Second one at http://www.convergen...rary/tool-1.jpg

Looks like it might be a right handed stabalizer for the left hand side of an upside down widgett!! :wacko: OK, so I don't know what it is. :)

Plumb bob?

That is the best one of those I have seen. OK I'm with Curly

It looks like a window sash weight.

Plumb bob?

We wondered but its just too big , no real center.

It looks like a window sash weight.

Like for a 40 ft window ;>)

Looks like it might be a right handed stabalizer for the left hand side of an upside down widgett!! :wacko: OK, so I don't know what it is. :)

well so far thats the best one I've heard!

looks like a left-handed , fur lined, cheese straightener to me.... of course, the fur is the first thing to go on these old examples...'

old steam shovel tooth?

its a bull rake tooth the wooden rake pole was split so the steel would slide between the two parts and then bolt in place. the steel would last longer than the wood some had the dished out sides as this one does and some had a pocket in which the wood would slide into  then the point was on top of that . I can get photos of mine if you need