Ed Steinkirchner Posted February 17, 2011 Share Posted February 17, 2011 forged this back in early january, I had the thing started for a year or 2 now, because I just didnt want to do all that hammering! so finally i took the time to do it, luckily my dad was there to strike, made it go a lot easier. it is a piece of steel that started out 1.5 inches round. the anvil is a vulcan arm and hammer and by my best gustimate it weighs 250+ pounds. the hardy hole is ABOUT 1.25 inches square, a little bigger one way. that is my 2lb? cross peen next to it. Ed Steinkirchner Quote Link to comment Share on other sites More sharing options...
KYBOY Posted February 17, 2011 Share Posted February 17, 2011 Man thats a lot of work aint it? The hardy hole on my fisher is 1 1/4". Well 1 1/4" with rounded edges Good job B) Quote Link to comment Share on other sites More sharing options...
CurlyGeorge Posted February 17, 2011 Share Posted February 17, 2011 Good job, Ed. Got a workout, eh? That's where a tire hammer or other power hammer really comes in handy. Thanks for sharing. :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.