pbforge Posted September 25, 2010 Share Posted September 25, 2010 I have had quite few inquiries for the manual and I am working on an updated revision. I have gathered some additional photos and also cleaned up some of the text. I also have an updated phone number for the company that sells the valve however the web link is still the same. I also have a new email address. You can reach me at degrub@yahoo.com. I have also had some more time to work with the hammer I made and I couldn't be happier! Thanks pbforge Quote Link to comment Share on other sites More sharing options...
ajclay Posted December 16, 2010 Share Posted December 16, 2010 Paul, Ron send me an e-mail saying that your e-mail address has changed and that you may not take PayPal. I'd like to purchase a set of plans for the new style hammer. It's been a few months since the last post so I'd just like to confirm what you'd like me to do about sending the money.... and also if you have the plans in stock. Thanks for the reply! Aj ajclay@cox.net awningandsheetmetalbr.com AJ Clayton [send check or money order and return mailing address to: Paul Branch 1310 - 216th Ave New Richmond, WI 54017 You can PM me here or email me directly at degrub@frontiernet.net. I will be off line from June 19th through June 27th and I will not be able to respond to PMs or emails.] Quote Link to comment Share on other sites More sharing options...
FlyingXS Posted January 31, 2017 Share Posted January 31, 2017 It's been a long time since these plans were released. Has there been any further advancements made with the design? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.