mbaird Posted January 9, 2010 Share Posted January 9, 2010 A friend of mine gave me a blower similar to the one shown in this picture. Took it home and realized that my forge table is too thick for the mounting angle. Any suggestions or drawings for how to mount this on its own stand? I was thinking of a 4x4 post with a cutout, so the blower outlet would sit in the groove and I could wrap/screw some angle iron bands around it... but that's not very elegant. :unsure: Quote Link to comment Share on other sites More sharing options...
Bad Creek Blacksmith Posted January 9, 2010 Share Posted January 9, 2010 How about taking a picture of your blower and forge so someone can see exactly what you have. Hold the blower up to the forge so we can give suggestions. With out looking at it couldn't you take some plate stock and make a bracket to bolt the blower to the forge? Quote Link to comment Share on other sites More sharing options...
zampilot Posted January 10, 2010 Share Posted January 10, 2010 Buy an extension piece from your local plumbing/big store shop that'll fit the blower exit and as long as you need to mate with the table. PVC would maybe work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.