Jamesrjohnson Posted May 20, 2009 Share Posted May 20, 2009 I had been told it was a good idea to build a safety cage for the Little Giant hammer... I have not personally had any problems with my LG 50 and have used it for years, but several years ago I did build a cage for it just in case. I had told Frosty that I would forward some pictures, so there they are. Any questions, let me know. Sorry for the delay, I have been out to the CBA, BAM, and just got back from the SBA in Georgia. Great set of conferences. Quote Link to comment Share on other sites More sharing options...
Charlotte Posted May 20, 2009 Share Posted May 20, 2009 That is the best design for a power hammer cage that I've seen.:cool: Quote Link to comment Share on other sites More sharing options...
Frosty Posted May 20, 2009 Share Posted May 20, 2009 WOW that's one heck of a cage! I like the bars rather than the usual plate, I like being able to see the moving parts. It gives me a chance to see a pin working loose or such before it takes off for parts unknown. Thanks James. Frosty Quote Link to comment Share on other sites More sharing options...
Bentiron1946 Posted May 20, 2009 Share Posted May 20, 2009 I like the way that it hinges open so you can work on the moving parts, lube every thing up and then close it up again. Nice idea.:cool: Quote Link to comment Share on other sites More sharing options...
Finnr Posted May 20, 2009 Share Posted May 20, 2009 Super design. Ilike that all the most likely to come flying at you bits are covered but still visible. Finnr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.