tinbender Posted March 27, 2009 Share Posted March 27, 2009 Hello all, I'll try not to make this too long. First knife for my good friend's father who gave me my first smith hammer. Sorry no pics as It's beyond me. Drop point hunter...O1 Forged 1" round close to desired shape Saber profile? full width to the line of point and about 1/3 of ricosso but did not think I would try for a clean line and blended the intersection. Working with 220 grit before heat treat and of all the things to get hung up on the bevel at the point is giving me grief. Remember now that sharpening the old buck I never really thought the point area was quite right. I have been working with the information studied here and thank you folks for all. Dave Quote Link to comment Share on other sites More sharing options...
markb Posted March 27, 2009 Share Posted March 27, 2009 Grind lines can be mind benders. Quote Link to comment Share on other sites More sharing options...
tinbender Posted March 27, 2009 Author Share Posted March 27, 2009 Just thought I would mention incase any other folks are having the same mental block we could compare notes. Thanks anyway Dave Quote Link to comment Share on other sites More sharing options...
Rich Hale Posted March 27, 2009 Share Posted March 27, 2009 If you cannot take pics then some drawings may help us understand what you want to know about... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.