-
Posts
186 -
Joined
-
Last visited
Profile Information
-
Gender
Not Telling
-
Location
West Virginia
-
Interests
Blacksmithing, BBQ, Sausage making, cast iron cooking
Converted
-
Location
Rural Southern Illinois
-
Interests
Blacksmithing, campfire cooking, barbeque
-
Occupation
Retired ordnance engineer
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
No time in Germany, but a lot of time in bars
-
-
We start "Cocktail Hour" everyday at 4:00. I ring the bell and we sit at the bar and look across the deck at the mountains. Whenever company drops by, everyone gravitates to the bar. I think I've got some photos, if anyone wants to see them (no photos of the forge yet, though.)
-
Didn't do anything but start the fire and see that it drew good. The last thing I have to do is bring in a stump and mount my anvil. Also need a helper to get the anvil up.I can handle the smaller Peter Wright but this a 300 pound Hay Budden.
-
Well, I'm back after quite an absence. I just finished installing a coal forge in my new work shop.The first since I moved from the farm in Illinois to here in West Virginia. I hope to get started working again soon. The move, having to build a shop building, rehab from a broken shoulder, and carpenter work around the house kept the blacksmith work on the back burner. Some of the carpenter work was really enjoyable.....you should see the home bar I built and installed.
-
Back to the forum
Dutchmancreek replied to Dutchmancreek's topic in Blacksmithing, General Discussion
Thanks guys.....yes, it is beautiful up here, although when anyone hears where I live they always ask "have you got four wheel drive" (I do). We bought the place for the view (among other things) so we're up quite a way above the elevation of Morgantown itself, up by Cooper's Rock. I'm told the winter is noticeable. Freeman....the New River Gorge is really something. We considered moving right there close to the bridge but decided it was a little too far from what we wanted to do. We're right close to the Cheat River and might try a canoe/raft trip next summer. -
I've been away for some time, busy with other interests, selling the farm, and moving. I'm not working in the forge right now but decided to get back on the forum. I recently re-located from Southern Illinois to West Virginia. I moved the whole shop along with everything else. I'm probably the only one who ever had coal shipped to West Virginia (hey, it was good coal and I wasn't going to leave it behind). The shop equipment is stored in the basement, since I don't have a shop built yet....that'll have to wait until next spring. Luckily the basement has a "walk out" door at ground level on the back side of the house so the movers could get everything in there. They had never moved a coal forge, 300# and 130# anvils, all the tooling, vises, stock, etc......kinda wore them out, with all the rest of the household stuff. I'm up north, just east of Morgantown, WV.......anyone else up this way?
-
A trammel is good for height adjustment, but a length of chain and s-hooks that fit in the links works fine too. Your dutch oven is the stove top style. All of mine have three legs, a flat rimmed lid, and already have a bail for campfire cooking. Here's another campfire idea.
-
I'm with the last two replies. I measure the length I need, cut it from the coil (usually with a cutting disc), and then straighten the cut off piece.
-
Shallow Forge welding
Dutchmancreek replied to Trav3500's topic in Blacksmithing, General Discussion
When I used a shallow rivet forge I used fire bricks to get more depth to the fire and was able to weld. Fire bricks are handy to have around for these types of "build ups". -
I bought mine from Centaur Forge and I've been very pleased with it. Steve
-
Highly polished gage blocks "wring together" easily. Some people think they are magnetic, but it's the surface finish that does it. Proably the same with welding. I know of one artist blacksmith who uses straight boric acid (roach powder) as flux with amazing results. Of course many rears of experience probably also contribute.
-
Set up a block to use as an anvil right on the edge of the forge. Small parts lose heat rapidly and moving them to the floor anvil and getting them ready to hit can sometimes be self defeating. I have a small rr rail anvil right there on the forge and stick small pieces together right there. Also remember to use a smaller hammer.... it doesn't take a hard hit to start your weld. Steve