-
Posts
134 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by oscar C
-
-
have him call josh at BIG BLU 828-437-5348...we'll take and forward some pictures ASAP.
-
-
all in one...very nice!
-
nice work!!
-
very nice!! i like the way you are haging it...nice detail!
-
very nice!..good looking piece of wood too.
-
very cool!!
-
I actually made a mistake. I supply the Big Blu with full tank pressure (175 PSI) through a 1" 200 PSI rated jack hammer air hose, but the pressure is knocked down to 150 PSI by the regulator, filter, oiler on the hammer. The KA is running on 175PSI though. I had also thought about the blows per minute, and hammer controll issues, as far as BPM Big Blu claims 0-225 on the 155, and on the KA it depends on how fast you are with your foot, but I would guess that it would be hard to even keep it at 180 BPM. As far as controll.. I don't really know that we can devise a test to measure controll because that all really depends on the operator expierience, condition of the machine, temperature of the machine, etc. I think Mike-hr came up with a great full power test, but as for controll, I am willing to accept the educated opinion of other Power Hamer operators. I know that I have no problems drawing 1/4" stock to a fine point with any of my hammers, or delivering a single light tap, or full force blow, which is a little tricky with the mechanical hammers but a breeze with the air hammers (pun intended!!)
well this is the kind of response we thought we would get. that is the reason we recorded the video and posted it to the you tube. 175 psi?...i wish we had that in the shop..we're pretty sure jose's is a mk3(one of the old qc hammers.. -
bring your ear plugs to try it :D
-
-
very nice!
-
the 65 uses the same die system as the 110 and the 155..
-
good looking hammer brian.
-
anyone going to quad state this year?
-
very nice!!!
-
-
good looking hammers brian! induction heating robots would be awesome!!!
-
nice work minotaur &blakksmyth..i'll have to try the candle holder version.
-
nice and clean..nice work
-
-
I wouldn't advise using it until you replace the top die holder..have you called josh?
-
I would recommend "The ABC'S of blacksmithing"
-
good looking mailbox..thanks for sharing
-
its about 36" tall and sits on a pedestal about 40" tall..randy the small base was fabricated out of angel iron
Off to Quad-State
in Events, Hammer ins, Where to meet
Posted
should be a good one this year...i'll be there