Tim simmons

Thanks for the pics

I plan on using it to make Damascus billets. I read a lot on using them, but wasn't for sure of what size. I been reading on different sizes but was not sure of the smallest you can go down to. Thanks every one for your reply's, it has be a great help. Thanks for all the time and info.

I plane on using it to make Damascus billets. I read a lot on using them but wasn't for sure of what size. I been reading on different sizes but was not sure of the smallest you can go down to.

Thanks for the reply’s

Ok , would you know if a log splitter less than 25 ton would work for a press? I can’t afford a high dollar press at this time.

Not sure is I can, sorry I don’t know what you mean about drifting hammers with it.

I am looking at getting a wood splitter to use as a press. My question is they come in different sizes. What would be the lease amount at ton pressure in the wood splitter? I was looking at a 25 ton but seen some smaller ones I can afford a little easier at this time. Any help would be grateful and thanks for taking to time to read and apply back

Thanks for the advice every one

Will the 110 work for making a Damascus knife? I know it takes layers of steel.

I am need to forging. I am looking at the kanca anvils 110 vs 165 #. I can get the 110 easy the 165 # will be harder to get. My question is, will their be much difference between the two anvils in weight on forging knives? Any help would be appreciated thanks.