-
Posts
349 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Zeroclick
-
-
Yes we got some at work they work really well for half the power usage and no warm up. But certainly in the UK work out to the same price as getting the thinner LED fittings.
-
I know I even said he can come and visit any time he likes
-
14 hours ago, JHCC said:
That is a nice little anvil. Wouldn't mind having that as a second.
I keep offering to buy it off him to help him clear some space in his workshop but he is determined to keep hold of it
-
I didn't know that, but they aren't to much of a problem we get a few midgies but they tend to stay under the trees on the other side of the garden.
-
-
Well I already have a side blast in the forge that is about the same size. It it just not collapsible to reduce space for travel.
I did consider a JABOD forge before I was given the tank.
-
Wow that really be a radical change, and I do really like the idea for a shop forge. But really I need them to take up as little space as possible and be to get these in the boot of my car along with everything for a sale and demo day.
-
I have seen that technique and will be giving it a go, really just wanted to push myself a bit. I was going to make a few pairs the hard way so I can get a better technique.
But it got really hot it looked like I had been in a pool in my clothes.
-
Thank you,
I have waited just over a year to give them a go building up to them and I'm glad I did but can already see how to improve the next pair hopefully I will start them tonight.
I may now be addicted to making tongs.
-
-
So I got this old water tank a couple of days ago with the intention of making two light weight potable bottom blast forges. The tank is about 24" across and has holes already at the top and bottom. At the bottom the hole and legs are just the right size to fit the black iron pip I had from my original forge.
I will be burning coke with it to keep smoke to a minimum, I was just hoping to get some advice on a couple of points.
- how deep would you cut the forge I only intend on using them for smaller pieces I was thinking somewhere between 6 to 8 inches.
- I was thinking of lining it with clay rather than sand so that when transporting it can't shift around. I have seen a lot of references to digging into the ground to get the clay but that isn't an option for me so what kind of clay would be best to buy. ie fire clay or just regular air drying clay.
Thanks,
Luke
-
That is true I think you would need a bigger shop than mine as it would eat up alot of space.
-
This water tank followed me home today when I went to visit my mentor he had askes his landlord if I could have it
Think it might be a bit big for a gas forge . I think I will turn it into two light weight portable forges.
It almost seems like it is meant to be the hole on the bottom and the legs are all just the right size to fit the pipe that I have already from my old bottom blast.
-
That seems nice and simple I will go with that.
Hopefully I can get a test one put together in the next couple of weeks. I have some wood ready for the Jabod, just need the bricks and cat litter.
-
On 21/05/2018 at 6:56 PM, Charles R. Stevens said:
The loose fill is cheap cat litter (bentonite clay) as sand melts to form slag.
Hi,
I just want to check when you say about the cheap cat litter is it bentonite clay or calcium silicate. I only are because I was looking at what is for sale in the UK and it is all made up of the calcium silicate. Would this have any effect or should it still be ok to use.
-
9 hours ago, Charles R. Stevens said:
To reduce the noise ad a “T” and expell the exes air. A lot quieter. I never have liked the wine of vacuum cleaners.
Do you mean something like this so that as I reduce the air it can redirect it out to prevent that whine.
-
My idea was to put together a JABOD for me to use and as an example for the kids. The camp I will be doing this will actually be made up of all three units so ranging from the beavers to the scouts so the age range is 5 to 14.
I like the idea of getting the older ones build forges. But that might be a seperate meeting when i can dedicate the time or build it up over a few weeks.
I was hoping with camp just to spark their interest in the craft. I may end up using a bit of both, and swapping the blowers to best suit the age group that i have on.
The advantage is i can rotate them so one pumps the air whilst the other works on their piece and swap over it would keep them out of mischief.
16 hours ago, Frosty said:Air is easy to move, you can use a paper bag or pillow case, cardboard boxes and some sticky tape make easy bellows. It also makes perfectly servicable air ducting to a made on the spot clay fire nozzle.
That would work towards 4 of the current badges unless they change them again. I do really like this idea for the older ones.
14 hours ago, Charles R. Stevens said:I prefer this type as the inlet and outlet are in the base as a posed to the handle. I don’t like the tube wiggling all over the place and it’s the biggest I have found. As to the 12v, they are noisy and you will need some way to control the volume
The hand pump does like a good option for what I have planned.
With the blower i was going to use a 3/4 ball valve like on your original JABOD.
-
22 minutes ago, Smoggy said:
it'll be along time before you run out ot scouts!
That is true they are an endless source of free energy
I do like the idea of using the manual pumps to save on power issues, and I am leaning towards the charcoal just to further ease the learning curve for the kids. I did consider the path of making some bellows but I dont think they will have time with all the other activities they will have to do.
-
Hi All,
So may be doing a bit of hands on experience with our scout unit, at the summer camp we have.
The site is in the middle of nowhere so no access to mains electricity and no cars on the site.
I was thinking of taking two forges with me, from what I can see I have the option of getting a hand powered blower similar to the ones being used on the JABODs
or I could go with a 12v mattress inflator and then wire up a battery pack to run both.
or could I use a rechargeable battery version of this?
I am tempted to not go with the hand blower option just because I want to be able to focus on what the kids are doing. Rather than having to keep the fires going. I am thinking of using soft coal or even charcoal as the fuel.
I will be running them for the majority of the day as the kids will be broken into groups and rotating constantly through the day.
Any advice would be great thanks.
Luke
-
7 hours ago, 58er said:
Thanks. Forged from 1” round stock. Textured with die I made and then texture was knocked down a little to tone it down
Cool thank you it looks really good.
-
21 hours ago, 58er said:
Antler lamp
The lamp is just beautiful, what size material did you use. Also how did you do the texturing.
I got some more work done on my first commission. The stamping is all done and they are mounted, overall I am pretty happy with it just got some finishing work to do tomorrow and then the client is connecting them on Monday.
-
-
-
16 minutes ago, Daswulf said:
Nice hanger Luke.
Thank you
It followed me home
in Blacksmithing, General Discussion
Posted
So I went down to the scrap yard and traded in an old radiator from the house for the same weight in scrap. The spring is 20mm and the biggest piece is 35mm, so I am pretty happy and whilst I was there I also saw what might be the start of a treadle hammer build but didnt have my wallet so will have to go back on Monday and see if it is all still there.