-
Posts
52 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Frankw
-
-
Hi,
Well done i like the nice even twist keep up the forge work. What type of finish will you put on it?
Cheers Frankw. -
No I have not forgotten 9-11
I was driveing out at that prosise moment to hang a set of gates when my wife called me in needless to say they never got them hung that day. :( -
Well done will you post pick's of the rest of the catalog when it is ready?
Cheers Frankw. -
I think a hint of green and red would make it in to a real strawberry.Well done
keep up the good work Jeremy -
Hello Prospector and welcome.
Keep up the good work. I would be divorced if i brought in my anvil. -
Hi Bendik,
Your welcome
There is plenty of inspiration and knowledge here you will find everybody very helpful.
Cheers Frankw -
Sorethumb, welcome to the forum also I find it hard to get time to follow everything here there is a vast amount of info good browsing.
Cheers Frankw -
I am following your hammer restoration with great interest please keep us updated
-
Sounds like a good idea Irnsrgn must keep it in mind.
---------
Frankw -
Keeping your Aunt in our prayers I hope all goes well.
Frankw. -
Nice to have you along Jerry. Keep up the good work.
Frankw -
Hi Dodge.
We had a great holiday thanks toured parts of Ireland.
I have tried peat or turf as we know it. Good black or stone turf will provide a dull to bright red heat but it burns very fast under blast.What I use it mostly for is lighting my forge there is a lot of smoke out of it also.The best place for it is in a range or stove.What neck of the woods are you in? -
If you have a drill with very slow speed you could try a new masonry bit and keep it well oiled I have had good susses with this method.
Drill the pilot hole with the same type of bit also. -
Congratulations to ye both And your family
-
Welcome abroad Denny I am just back form my holidays so I am trying to catch up on every thing that is happening
-
I am from Ireland.You are very welcome. I think this is a great site also I have learned a lot over the last few weeks. I wont be around for the next two weeks as I am going on holidays.I will have a lot to catch up on when I get back.
-
Thanks Richard and Chris ye all have been a great help.
Cheers Frankw. -
Hi Richard,
Thanks for the pic they are a great help.
What size motor are you running .
Cheers Frank -
Hi Jim I am from Ireland I am new to this also.
Cheers Frank.:) -
Hi Richard,
Sorry to hear about your camera there is no hurry I wont be using all this info and help from you and other members for a while as I will have study it all first.
Cheers Frank. -
Hi Richard,
Would it be possible to take a photo of the inside of the box safely -
Hi Richard.
Thanks for that info.
What you did is a good idea electric's would not be my strong point. -
Hi Strine
I would love to get any info on this subject as I hope to set up some 3 pH motors in the future.
Cheers frankw. -
The Hammer loooks good. What size motor or engin will it take to run it?
Hotforge101 in the hospital
in Prayer List
Posted
Speedy recovery Ed my prayers are with you and your wife.
Frankw