Jump to content
I Forge Iron

cardoso5fr

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by cardoso5fr

  1. Mtech is more or less specialised in the cheap knives... If the C is not write, it's very possible the steel is simply a 440A. Function of the heat treatment, it could be not bad at all. The problem with the 440 serie, some company heat treat it very hard and don't pay attention of the heat treatment. It's create blade with a very big grit, very hard. And hard to sharpen correctly. Or sometime that is the contrary, very soft blade which don't hold the edge at all..
  2. There is various reason possible about the problem to drill the hole. 1 Your drill bit was old, or have cut something as titanium. 2 The speed of drilling is too fast as it has been said by Mrobb 2 The annealing was too fast and the heart of the steel piece is always more or less hard. 3 You have used a steel as O2 which is almost an air hardened steel. If the annealing is faster than 20
  3. I use to play, make and sell balisong I'm mod
  4. Nice, but it's maybe not a good idea to carry a friction folder as neck knife in other way than in a sheath.
  5. Hello Everybody. i'm a newbie here and make my first post in introduction section. I'm 27 years old, make knives since three years on my free time. I'm member from a lot of knives community and specialy balisong community. I produce balisong, frame lock, friction folder and small fixed blade. What could i say more. I began to forge steel since one year in a small salad fruit can forge with a butan torch. (that the reason why i make small blade.) I hope to learn a lot of thing in that community and to share the little thing i know .
×
×
  • Create New...