Nghtmrknife
-
Posts
62 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Nghtmrknife
-
-
will do . i found some other designs i would like to try but for now i have to upgrade my forge . i only have a brake drum forge and an old hand crank tiger blower . i would like to make a bigger one on a table for more working space.
-
ya i did the finishing touches with a grinder and a flapper disc, i think it turned out .
-
if your worried about paint on the work, paint the sides and leave the top bare.
-
welcome to IFI. As a noob to the blacksmith art i found this site very resourceful and helpful, have fun.
-
nghtmrknife how was pounding the rail spikes in
it wasnt that bad i had a 4 pound mini sledge i used. I was hitting a little harder than i would steel. -
just a stump I found at my parents place. Levelled bottom and notched top down 3/8 so anvil sits down. also anchored with 4 railway spikes.
-
-
-
-
amazing video its like you took us on a little trip very well done
-
-
found a picture
-
i read some where that the spikes that have HC stamped in the top have a higher carbon content. But the old ones im not sure.
-
-
ok start small work up got it.
-
k well thanks for the advice i guess ill start there.
-
Ya i kind of figured thats how i came off. but i am really interested in learning
-
Hi my name is Jason. I am very interested in blacksmithing. I have all the parts to start my forge up. and i'm wondering what the best way is to make damascus.
-
ok thanks for the info.
-
would you know if it is cast or not
-
new vise
in Vises
Posted
Just got this vise. Free from a family friend.