wpearson

try here 

http://www.rmetalart.com/tools.htm

start here

/'?do=embed' frameborder='0' data-embedContent>>

'?do=embed' frameborder='0' data-embedContent>>

?do=embed' frameborder='0' data-embedContent>'?do=embed' frameborder='0' data-embedContent>>?do=embed' frameborder='0' data-embedContent>

'?do=embed' frameborder='0' data-embedContent>>

?do=embed' frameborder='0' data-embedContent>'?do=embed' frameborder='0' data-embedContent>>?do=embed' frameborder='0' data-embedContent>

'?do=embed' frameborder='0' data-embedContent>>

in 1st post the gas escapes from the bottom of the inverted inner drum 

oops

look at post 20                                                                                                                                                   

What is it that you are looking for?  The Blacker is a fairly rare (in the US) machine, but is well thought of in the UK.  It is a very sophisticated machine, not as powerful as a LG in the same weight class, but it has lots of adjustments and flexibility.  And it's a very small package.

 

 

Thats enough thank you

Yes i have read that dose not say much

 Whats your thoughts on the blacker power hammer linkage?

Wes 

List of suppliers can be found her:

'?do=embed' frameborder='0' data-embedContent>>

'>

http://www.iforgeiron.com/page/index.html/_/blueprints/original-series/bp0099-tongs-r328

 

 

by hand

do they make a 3000 degree soft brick

change orifice size 

I think I may have to drill some holes and bolt the thing together. At least this way I dont have to worry about damaging the forge.
 Giles

Oh you might want to think about sealing that concrete before you start slopping oil around. I used to have a really good sealer, but the newer government mandated  "environmentally friendly" formulas don't hold up as well to oil as the old ones did. I'd need to do some research before I could make any suggestions about current formulas.

sodium silicate ?

on insulating sleeving you might want to look into using Kevlar, that withstands great temperatures I think, does anyone know what it will take or if it is available in a sleeve form

'?do=embed' frameborder='0' data-embedContent>>

I posted several weeks ago asking people about best hammer features. That post is missing. One person did provide some feedback and that post is missing. What gives?

ifi lost two days

Frosty think hitchmount

wes

the 112& 164cfm blowers at   blacksmiths depot are the ones grant talked about

start here http://www.iforgeiron.com/forum/64-solid-fuel-forges/

wes

try here http://blacksmith.org/events/blacksmith-swap-meet/

'?do=embed' frameborder='0' data-embedContent>>

I'm with you  Thomas, that or charge time and materials above the agreed price.

 

Not to hijack the thread Henrick, sorry.  But I need a little help here, I was digging through a box of steel I fellow sent me some time ago and I found something I don't know about. Crucible Rex-95.

 

Anybody know what I have here?

 

Frosty The Lucky.

http://www.crucible.com/eselector/prodbyapp/highspeed/rex95.html