Jump to content
I Forge Iron

wpearson

Members
  • Posts

    240
  • Joined

  • Last visited

Everything posted by wpearson

  1. Yesteryearforge Posted April 29, 2005 Rantalin If you would like to send me your shipping address I will send you a piece of steel in the 80 to 100 lb range suitable for pounding on. It will be either 1018 crs or hot roll. this is the conversation.
  2. The Radius Edge wheel is 8" in diameter and has a 5/8" arbor hole. Diameter = 8" Wheel width = 1.5" Arbor hole = 5/8" CBN (cubic boron nitride) grinding wheels are state-of-the-art for grinding high-speed steel tools These wheels are designed for use with bench-type grinders. 1800 rpm or 3600 rpm Perfect for sharpening woodturning tools (high speed steel) Provides a superior edge compared to the old stone wheel Balanced – does not require "truing" These wheels will change the way you sharpen forever – Think razor sharp edges. CBN or Cubic Boron Nitride grinding wheels are designed for sharpening high speed steels only and should not be used for other applications. These wheels have a 1.5" face so they are easy to use and work well with the Wolverine Sharpening System. The 180-grit wheel puts almost a mirror finish on your edges and makes them "scary sharp."
  3. CBN or Cubic Boron Nitride grinding wheels are designed for sharpening high speed steels only and should not be used for other applications.
  4. after 5-6 minutes it might have been to cold to hammer on.
  5. your blower has a air adjustment in this picture just screw it in.
  6. try tightening nut into the propane tank.
  7. The stuff is "S-7 Hi-Shock Air Hardening Drill Rod - 36 In. Diameter: 3/32 Overall Length: 36" MSC Item #06095061 Had a chance to Tig Weld with this Rod today on a piece of scrap. HOLY FRIHOLIES!!! THIS STUFF IS STRONG!!
  8. wpearson

    Leg vice help

    steel is missing on the fixed leg
  9. Sounds like your are using to much air.
  10. I believe Larry had moved on previously.
×
×
  • Create New...