Valentin Posted June 1, 2008 Share Posted June 1, 2008 I don;t know if u guys have seen it but i just found it and thought about sharing it with you. No other words needed here is the link : Making hidden tang knife on Vimeo Quote Link to comment Share on other sites More sharing options...
HWooldridge Posted June 1, 2008 Share Posted June 1, 2008 I enjoyed that - thanks for posting it. Quote Link to comment Share on other sites More sharing options...
Rich Hale Posted June 1, 2008 Share Posted June 1, 2008 EVery aspiring knfe maker might want to look at this,,It is a quick overview of one way to make a knife. Quote Link to comment Share on other sites More sharing options...
Graham Fredeen Posted June 1, 2008 Share Posted June 1, 2008 Thanks for posting that. It was a really good video and that man makes a pretty good knife. The only thing that I didnt like very much was that he welded the tang onto the blade, instead of making the blade and tang one piece, and especially since he welded the tang onto the blade at the most critical point where the tang meets the blade. This is bad practice in my opinion and can lead to knife failure down the road. However, he renforced that area with the bolster so I suppose it should be alright. Quote Link to comment Share on other sites More sharing options...
Thunderstrike Posted June 30, 2008 Share Posted June 30, 2008 Very nice video thanks for sharing it. One way to make a knife and better yet a basic overview of a sheath. Rock on. ~TS Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.