mike-hr Posted July 30, 2014 Share Posted July 30, 2014 I got my belt grinder 2 or 3 years ago, can't remember. It has seen a lot of use in that time. It has the mail-order aluminum drive and idler wheels, I think from beaumont tools. Anyway, the last month or so, it's been hard to keep from throwing belts under a load, and the belts would fly off during start-up, run across the floor, and try their best to climb up the power hammer. I was getting ready to tear the drive wheel off and re-cut a crown on it, because it had worn flat. I called a buddy who has several grinders to see if I was doing the right thing. He told me to wrap 4 or 5 wraps of black electrical tape about the center of the drive wheel, and go back to work. By golly, it starts, runs, and tracks like it was new...Thanks, JE! mike Quote Link to comment Share on other sites More sharing options...
bigfootnampa Posted July 30, 2014 Share Posted July 30, 2014 Thanks for sharing, Mike!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.