Jerry W. Posted April 10, 2012 Share Posted April 10, 2012 I have been wanting a treadle hammer for awhile. Has anyone seen or tried the Mark In-Line Treadle Hammer. I am not interested in the Power Pack. Any help that you can offer is greatly appreciated. Jerry Quote Link to comment Share on other sites More sharing options...
CurlyGeorge Posted April 10, 2012 Share Posted April 10, 2012 Not familiar with the one that you mentioned. But I am familiar with this one. http://www.bigfootenterprizes.com/ Quote Link to comment Share on other sites More sharing options...
wana be Posted April 10, 2012 Share Posted April 10, 2012 Hi I've had one of these hammers for about four years am very pleased with it. Very smoth action the head runs up & down in roller bearings. The only prob. I had is the way the top die is held in place with a bolt it can mess up the threads. The way I resolved that was to bore in about 1/4" deep into the die shank same size dia. as bolt then remove about 3/8" of the threads from bolt no more prob. I do have the air assist power power pack & it really came in handy when I was fullering some 1/2" x 2" in a die for a cap rail it was 8' long & I had a problem holding it & reaching the foot treadel. wana be Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.