tab112983 Posted March 20, 2012 Share Posted March 20, 2012 Made my first forge today. I cut a groove in two soft fire bricks and stacked hard fire bricks around it. I cut a fire hole in the side that is deeper and higher than the working chamber. I cut a hole in a third fire brick to hold my oxy acettlene torch at the fire hole. I used a metal heating tip and cranked it up. After a couple of minutes it glowed red inside. I havent tried to work with it yet. Comments or concerns are welcome, thanks! Quote Link to comment Share on other sites More sharing options...
Daniel.85 Posted March 20, 2012 Share Posted March 20, 2012 Seems like it would work for some stuff, good a place to start as any, just work your way up from there, may not be the most efficient forge but wont hurt to try, just be safe. Also, see my signature below, it applies, haha thanks Phil, its already useful. Quote Link to comment Share on other sites More sharing options...
tab112983 Posted March 20, 2012 Author Share Posted March 20, 2012 I am trying to upload some images but I keep getting error message 403, any suggestions? Quote Link to comment Share on other sites More sharing options...
Daniel.85 Posted March 20, 2012 Share Posted March 20, 2012 I am trying to upload some images but I keep getting error message 403, any suggestions? Go to photobucket.com and make a profile, its free, and you can upload the pics from there just by copying the image link to your post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.